Comfort Mat EXTREME PRO MAX

The Comfort Mat EXTREME PRO MAX vibration-damping mats have a total thickness of 8 mm with a foil thickness of 2 x 0.10 mm

Technical Features
- Increased adhesion to metal
- High mechanical loss factor
- Water resistant
- Sealing and anti-corrosive properties
- Mastic consisting of special polymers and modified elastomer

Application
- Interior floor and trunk
- Wheel arches inside/outside
- Hood

Assembly
- Heating up to 50C required
- Degrease the surface
- Press firmly with a roller (short/long)

Instructions for correct application:

1. Surface Preparation : Ensure the surface where the mat will be applied is clean, dry, and flat. Remove any dirt, dust, or oil.
2. Remove the backing paper : Before heating the mat, remove the backing paper. This is important because the backing paper is coated with silicone, which can damage the mat's adhesive when heated.
3. Heating the Mat : Gently heat the mat to at least 50 degrees Celsius using a suitable heat source. This makes the mat more flexible and improves adhesion.
4. Applying the Mat : Carefully apply the heated mat to the prepared surface. Press/roll the mat firmly and smooth out any air bubbles for optimal adhesion and finish.

Advice Second Layer

After installing a Vibration-dampening Mat, we recommend applying a second layer of damping. Depending on the application, you can choose a sound-insulating/absorbing material.

Doors
- Comfort Mat Integra 6mm (28dB sound reduction / up to 9 x sound reduction)
- Comfort Mat TSUNAMI 18mm

Roofs
- Comfort Mat Skyline 7mm (20dB sound reduction / up to 6 x sound reduction)

Interior, Wheel arches
- Comfort Mat Raptor 4mm (30dB sound reduction / up to 10 x sound reduction)
- Comfort Mat Blockshot 8mm (30dB sound reduction / up to 10 x sound reduction)
- Comfort Mat Titan 8mm (38dB sound reduction / up to 12 x sound reduction)

Loose Panels
- Comfort Mat Ultra Soft 5 5mm
- Comfort Mat Ultra Soft 10 10mm
- Comfort Mat Soft Wave 15mm
- Comfort Mat Soft Wave EXPERT 15mm